| Specification | | S.No. | Item Description | Qty | | SCREW SET – LARGE, S.S. | | | Set Consisting of: | Units | | 1 | 4.5mm Cortex Screw | | | 7 each of 14, 16, 18, 20, 22, 24mm | 42 | | 14 each of 26, 28mm | 28 | | 12 each of 30, 32, 34, 36, 38mm | 60 | | 6 each of 40, 42, 44, 46, 48, 50mm | 36 | | 2 | 6.5mm Cancellous Bone Screw/16mm | | | 2 each of 25, 30, 35, 40, 45, 50, 55, 60mm | 16 | | 3 each of 65, 70, 75, 80, 85, 90, 95mm | 21 | | 2 each of 100, 105, 110mm | 6 | | 3 | 6.5mm Cancellous Bone Screw/32mm | | | 4 each of 25, 30, 35, 40, 45, 50, 55, 60mm | 32 | | 2 each of 65, 70, 75, 80, 85, 90mm | 12 | | 4 | Malleolar Screw 4.5mm | | | 2 each of 25, 30, 35, 40, 45, 50, 55, 60mm | 16 | | 5 | Large Washers | 12 | | 6 | Screw Holding Forceps | 1 set | | 7 | S.S.Container | 1 set | | PLATE SET, S.S. | | | Set Consisting of: | Units | | 1 | Narrow DCP – 4.5 | | | 2 each with 5, 6, 7, 8, 9, 10 Holes | 12 | | 2 | Broad DCP – 4.5 | | | 2 each with 6, 7, 8 Holes | 6 | | 1 each with 9, 10, 12, 14, 16 Holes | 6 | | 3 | Reconstruction Locking Plate 5.0mm LCP | | | 2 each with 4, 5, 6, 7, 8 Holes | 10 | | 1 each with 9, 10, 12, 14 Holes | 5 | | 4 | T-Plate | | | 1 each with 4, 5, 6, 7, 8 Holes in Shaft | 5 | | 5 | Semi Tubular Plate 4.5 | | | 1 each with 4,5,6,7 holes | 4 | | 6 | T-Buttress Plate | | | 1 each with 4, 5, 6, 7, 8 Holes in Shaft | 5 | | 7 | L-Buttress Plate – Left Angled Shaft with 4 Holes | 1 | | 8 | L-Buttress Plate – Right Angled Shaft with 4 Holes | 1 | | 9 | S.S.Container | 1 set | | INSTRUMENTS FOR LARGE FRAGMENTS | | | Drill Bit- S.S.- Quick Coupling End | | | 1 | Dia.3.2mm, Length:130mm | 1 | | 2 | Dia.4.5mm, Length:130mm | 1 | | 3 | Dia: 4.5mm | 1 | | 4 | Dia: 6.5mm ( Cancellous) | 1 | | 5 | Counter Sink for 4.5, 6.5mm Screws ( 8.0mm Head) | 1 | | 6 | Counter Sink- Q.C. 8.0mm Head | 1 | | 7 | Quick Coupling Handle ( T- Type) | 1 | | 8 | Hexagonal Screw Driver with Sleeve 3.5mm Tip (EXCEL) | 1 | | 9 | Hexagonal Screw Driver 3.5mm Tip | 1 | | 10 | Screw Driver Shaft Q.C. End, 3.5mm Tip | 1 | | 11 | Large Plate Bender- Pair | 1 | | 12 | Large Depth Gauge | 1 | | 13 | Large Neutral & Loaded Drill Guide | 1 | | 14 | Drill Sleeve 3.2mm | 1 | | 15 | Drill Sleeve 3.5mm | 1 | | 16 | Tap Sleeve 4.5mm | 1 | | 17 | Tap Sleeve 6.5mm | 1 | | 18 | Drill Sleeve 4.5mm | 1 | | 19 | Drill & Tap Sleeve Combined 3.2/4.5mm | 1 | | 20 | Drill & Tap Sleeve Combined 3.2/6.5mm | 1 | | 21 | Insert Drill Sleeve 3.2mm | 1 | | 22 | Pointed Drill Guide. | 1 | | 23 | Sharp Hook. | 1 |
|
|---|
