How Orthopedic Locking Plates Will Make Surgical Life Easier

by admin

Posted on August 30, 2019 at 12:15 PM

Orthopedic Locking Plates

Orthopedic locking plates are sometimes also called locking compression plates. They are made by using a combination of locking screw and the traditional plating technology. These plates have plates along with screws. The primary aim behind using screws is to fix the plates where they need to be without any chances of failure. With screws present within them, these plates do not get loose and fall apart.

Orthopedic locking plate supplier sells and bone locking screw suppliers these plates in different types of materials like aluminum and titanium. They are also available in stainless steel. It is important to note here that the plates and screws should be made of the same material, else they will destroy the implants. Titanium plate for bone fracture is quite popular among them.

When are they used?

Bone plates are used to treat fractures. They are fixed on both sides of the rupture with the help of screws. These days, it is quite common to use plates when there is no other way to treat a bone fracture. Each human body and its requirement is different from others. Therefore, it is essential that your doctor chooses the right kind of plate suitable for your skeletal structure.

One of the primary reasons for using locking plates is to enhance the performance of the plate and bones. This means that if appropriately connected, locking plates can improve healing of the bones quite significantly. In traditional plating, there were more chances of failure when the weight of the patient increases that of the force between the bone and plate. This is not the case with locking plates. Here the plating will fail only when the weight of the patient exceeds the compressive strength of his bones.

In locking plates, the stability of the joint depends on the right angle at which the screw is fitted in the plates. The locking plate mechanism is quite tremendous and makes surgical procedures very easy for doctors.

For the plates to serve their purpose, it is essential that they should be of appropriate length and width, according to the bone for which they will be used. They should also have a symmetric hold over the fractured bone from both sides. When the plate is inserted, it should be made sure that it is neutralizing all the forces like bending, compression, etc. acting on the bone.

Need to use locking plates

Surgeons feel the need to use locking plates when they want an accurate alignment of the bone that has been damaged. They also resort to the use of locking plates, when using screws is not sufficient to hold the joint in place and when they feel that the screws and plates together can only share the load of the bone.Ortho bone screw suppliers are in high demand because of this.

Locking plates are generally used for joints and also in the bone of the forearm. They are also used for the bones on the face and jaw and the pelvis.

The basic principle behind using these locking plates is that they can hold smaller bones with ease. They are not generally used for long bones like the femur, etc.